APC Smart-UPS RT 3000VA 230V

Serial connectivity

Provides management of the UPS via a serial port.

LED status indicators

Quickly understand unit and power status with visual indicators.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

Intelligent Card Slot

Customize UPS capabilities with management cards.

Avoids costly power problems by keeping your IT equipment and data protected and available .

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Low operating and maintenance costs with proven reliability and intelligent battery management .

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry's most rigorous standards.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Cold-start capable

Provides temporary battery power when the utility power is out.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Scalable runtime

Allows additional run time to be quickly added as needed.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Arranque en frío	Yes
Battery Technology	Valve-Regulated Lead Acid (VRLA)
Cartucho de batería de repuesto	APCRBC140
Intercambio de baterías en caliente	Yes
Prueba automática de la batería	Yes
Tiempo de recarga de la batería	2,5 h
Certificación	EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, VDE
Factor forma	Rackmount/Tower
Indicadores LED	Yes
Longitud cable	2,4 m
Alarmas(es) sonora(s)	Yes
Apagado de emergencia (EPO)	Yes
Calificación energética de sobretensión	480 J
Capacidad de potencia de salida	3 kVA
Distorsión armónica total (THD) de voltaje de salida	3 %
Eficacia	92 %
Factor de cresta	3:1
Frecuencia de entrada	40/70 Hz
Frecuencia de salida	50/60 Hz
Modos de alarma audible	Alarm when on battery/Low battery alarm/Overload alarm
Nivel sonoro	55 dB
Onda	Sine
Potencia de salida	2100 W
Protección de sobretensión	Yes
Reinicio automático	Yes
Topología UPS	Double-conversion (Online)
Voltaje de funcionamiento de entrada (máx.)	280 V
Voltaje de funcionamiento de entrada (mín.)	160 V
Voltaje de funcionamiento de salida (máx.)	240 V
Voltaje de funcionamiento de salida (mín.)	220 V
Altitud de funcionamiento	0 - 3048 m
Altitud no operativa	0 - 15240 m
Humedad relativa de almacenamiento (H-H)	0 - 95 %
Humedad relativa de funcionamiento (H-H)	0 - 95 %
Temperatura de almacenamiento (T-T)	-15 - 45 °C
Temperatura de funcionamiento (T-T)	0 - 40 °C
Cables incluidos	RS-232
Manual	Yes
Interfaz serie	Yes
Puerto USB	Yes
Salidas AC	13 salidas AC
SmartSlot	Yes
Tipo de interfaz serie	RS-232
Tipos de salidas AC	C13 coupler/C19 coupler/IEC Jumpers
Certificados de sostenibilidad	RoHS
Compliance certificates	RoHS
Warranty	2 #ProductAttributes.Unit.Year#