IP30 Industrial Renewable

Industry-leading Integration of PoE Technology and Renewable Power System

PLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless network and remotely monitoring and managing the IP-based devices. Based on its green technology, the BSP-360 can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs, especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways.

PLANET NMS-360 Network Management Controller can centrally manage up to 512 BSP-360 units and 2,048 PLANET IP cameras via MQTT and ONVIF Protocols. (Please regularly check PLANET website for the latest compatibility list of managed devices.)


MPPT (Maximum Power Point Tracking) Charge Controller

An MPPT (Maximum Power Point Tracker) is an electronic DC to DC converter that optimizes the match between the PV solar panels and the battery bank or utility grid. They convert a higher voltage DC output from solar panels (and a few wind generators) to the lower voltage needed to charge the battery effectively.


Zero-Carbon and Stable Power Supply

The nickel-cadmium or lead-acid battery gets recharged by way of the BSP-360 where solar power is sourced. Thus, the BSP-360 will keep powering PD devices without the need of any cabling. Its zero-carbon feature is made possible as the energy the unit gets is renewable. Most importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.


Smart Battery Management

The BSP-360 features the following special power management functions:

- Current battery usage status by percentage
- Low voltage cut-off protection


Current Battery Usage Status

The administrator can remotely access the BSP-360 to know the power status of the battery and renewable energy, and the estimated time of power consumption.


Low Voltage Cut-Off Protection

If the remaining energy is too low to power the network, the system will automatically power off the device to make sure the system works normally, and an alert is then sent to the administrator at the same time.


Smart PoE PD Management including PLANET ONVIF IP carmera

As it is the managed PoE switch for surveillance, wireless and VoIP networks, the BSP-360 features the following special PoE management functions:

- PD alive check
- Scheduled power recycling
- PoE schedule
- PoE usage monitoring

ONVIF management functions:

- Supports PLANET ONVIF IP camera discovery
- A maximum of four PLANET ONVIF IP cameras can be powered by one BSP-360 switch.
- Supports IP camera snapshot function in the LAN.


Intelligent Powered Device Alive Check

The BSP-360 can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the BSP-360 will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.


Scheduled Power Recycling

The BSP-360 allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.


PoE Schedule for Energy Saving

Under the trend of energy saving worldwide and contributing to environmental protection, the BSP-360 can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.


PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage

Via the power usage chart in the web management interface, the BSP-360 enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the BSP-360 helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the BSP-360 has three LED indicators of different power usages.


User-friendly and Secure Management

For efficient management, the BSP-360 is equipped with web and SNMP management interfaces. With the built-in web-based management interface, the BSP-360 offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software.

Almacenar y reenviar	Yes
Capacidad	5,95 Mpps
Capacidad de conmutación	10 Gbit/s
Tabla de direcciones MAC	8000 entradas
Botón Reset	Yes
Certificación	FCC Part 15 Class A, CE
Código de protección (IP)	IP30
Color producto	Blue/White
Indicadores LED	Activity/Fault/Link/Power/System
Montaje a pared	Yes
Montaje en carril DIN	Yes
Gestión basada en web	Yes
Tipo de switch	Managed
Auto MDI/MDI-X	Yes
Estándares de red	IEEE 802.1D/IEEE 802.3/IEEE 802.3ab/IEEE 802.3af/IEEE 802.3u/IEEE 802.3x
Full duplex	Yes
Modulación	PWM
Negociación automática	Yes
Protocolo de árbol de expansión	Yes
Semidúplex	Yes
Soporte 10G	No
Soporte de control de flujo	Yes
Disipación de calor	461,5 BTU/h
Humedad relativa de almacenamiento (H-H)	5 - 95 %
Humedad relativa de funcionamiento (H-H)	5 - 95 %
Temperatura de almacenamiento (T-T)	-10 - 70 °C
Temperatura de funcionamiento (T-T)	-10 - 60 °C
Voltaje de entrada	60 V
Firmware actualizable	Yes
Tamaño del búfer	512 KB
Puertos Ethernet RJ-45 de conmutación básica	5
Puertos USB 2.0	1
Tipo de puertos Ethernet RJ-45 de conmutación básica	Gigabit Ethernet (10/100/1000)
Características de protección de alimentación	Short circuit
Consumo de energía (típico)	135,36 W
Corriente de entrada	6 A
Corriente de salida	1 A
Voltaje de entrada DC	24 V
Voltaje de salida	24 V
Alimentación PoE	Yes
Alimentación PoE por puerto	30 W
Cantidad puertos PoE	4
Presupuesto total alimentación PoE	120 W
Algoritmos de seguridad	SNMP
Características DHCP	DHCP server
Filtrado de direcciones MAC	Yes
IGMP snooping	Yes
Garantía	5 años

Características principales

• Puertos: 5 puertos
• Tipo de puertos: Gigabit Ethernet (10/100/1000)
• Gestión: Managed
• Presupuesto PoE: Sí
• Capacidad de conmutación: 10 Gbit/s
• Tabla MAC: 8000 entradas